figran

A blank cell is not a zero: four source checks for teaching tables

By Figran Team. We are associated with Figran, a commercial AI-assisted visual creation service. This original worksheet was prepared with AI assistance and checked for internal consistency. It uses invented classroom records, not research data, measurements, or evidence about a product's performance. You can complete it on paper; no software account is needed.

A table can contain a zero, an empty cell, and a dash in the same column. They may look like three ways to say “nothing.” That interpretation needs evidence. A zero can be a recorded value, an empty cell can mean that nothing was entered, and a dash can have a meaning defined in the source notes. The column heading alone does not resolve those differences.

This exercise asks learners to preserve those distinctions when turning a source table into a teaching visual. It also checks what happens when a display omits a row. Omission changes what a reader can see; it does not establish a value for the omitted record.

The invented source card

Use this card as the complete source for the exercise. Do not add facts from your own experience.

Card version: Classroom stock register, revision 1. The field “Recorded spare tokens” contains a non-negative whole number when the clerk entered a count. An empty cell means “no entry recorded.” A dash means “not applicable: this kit does not use spare tokens.” The card does not specify the reason for a missing entry. It does not claim that the counts were independently verified. Kit labels identify rows; they do not describe real people or organizations.

Kit label Recorded spare tokens Source note
Alder 0 Count entered.
Birch 4 Count entered.
Cedar No entry recorded.
Dune — Spare tokens not applicable for this kit.
Elm 2 Count entered.

The empty Cedar cell is intentional. When this table is copied into a medium that hides empty cells, use the accompanying text: “Cedar: no entry recorded.” Do not fill the cell with a number merely to make the table look complete.

Four source checks

1. Check the zero. Find the source rule that explains what a number in this field represents. Alder has a recorded count of zero spare tokens. A faithful label is “Alder: recorded count 0.” The source does not say that Alder needs no tokens, that a kit is complete, or that its count has been independently checked. Those are different claims.

2. Check the blank. Cedar has no entry recorded. We cannot infer a count of zero, infer a positive count, or infer why the clerk left the cell empty. “Cedar: not recorded” preserves what is available. “Cedar: 0” changes it. “Cedar: awaiting inspection” invents a reason that the card does not supply.

3. Check the dash. Here the source explicitly defines the dash as not applicable. In another table, a dash could have another meaning. The definition belongs to this card and this field. “Dune: not applicable” is supported; “Dune: not recorded” would collapse two source states. If the definition were absent, a reviewer should leave the symbol unresolved and request its meaning.

4. Check the missing row. Suppose a display shows only Alder, Birch, Cedar, and Dune because it limits the list to the first four source rows. Elm disappears from the display, but the source still records Elm as 2. An absent row is not an empty cell. A useful display note is “First four source rows shown; Elm is omitted by the display limit.” Do not label Elm as zero or unknown on the basis of that omission.

Repair the teaching visual

An invented draft visual has this headline: “Spare tokens by kit.” Its designer draws four equal-size boxes, writes four labels, and adds a note about Elm:

  1. Alder — none needed.
  2. Birch — 4 recorded.
  3. Cedar — 0 recorded.
  4. Dune — data missing.
  5. Elm — not shown, so unknown.

For each label, write “supported,” “unsupported,” or “misstates the source,” then give a replacement if needed. Keep the boxes equal in size for this exercise: their size is decorative and must not encode a quantity. Use words in addition to any color or symbol so that each state remains distinguishable in a text companion.

A suitable replacement headline is “Source entries for spare tokens.” It avoids implying that every box contains a comparable numeric count. The figure note should define the number, blank, and dash states and identify the source card version. If a display is limited, put that limitation next to the visual rather than only in a distant methods note.

Answer key and a decision that remains open

  1. Alder: unsupported. Replace “none needed” with “recorded count 0.” A recorded stock count does not establish a requirement.
  2. Birch: supported. “4 recorded” accurately reports the field. It does not certify the count.
  3. Cedar: misstates the source. Replace “0 recorded” with “no entry recorded.” Keep the reason unspecified.
  4. Dune: misstates the source. Replace “data missing” with “not applicable for this kit,” using the card's own definition.
  5. Elm: misstates the source. Replace with “recorded count 2; omitted from the four-row display.” Use a note outside the displayed rows if Elm has no box there.

A learner might ask whether Birch and Elm should appear together in a numeric chart. That choice depends on the teaching purpose and on a clear statement about which records are included. This worksheet does not establish a rule that all nonnumeric states must be discarded. If you create a numeric-only view, identify the included rows and explain where Cedar and Dune can be found. Keep the full source accessible.

A short review record

Before approving the visual, complete these six lines:

  1. Source card and version: ______
  2. Numeric-field definition: ______
  3. Empty-cell meaning and unresolved reason: ______
  4. Dash definition and where it applies: ______
  5. Display limit and any omitted source rows: ______
  6. Approved wording plus remaining uncertainty: ______

Test the result with two questions: “Which kit has a recorded zero?” and “Which kit has no entry recorded?” A reader should be able to answer Alder and Cedar separately without inferring either answer from the color scheme. This is a wording check on an invented exercise, not a claim about a tested classroom outcome.

Extension: remove the dash definition from a copy of the source card. The correct review response changes to “dash meaning unresolved.” Learners should identify the missing definition before making a replacement label; they should not carry the original definition into a different source without checking it.

Reuse and contact

The original teaching text and invented table records in this worksheet are available under Creative Commons Attribution 4.0. Attribute them to Figran Team and link to this worksheet. This license does not cover Figran software, brand assets, or third-party material, and it does not make Figran open source.

Brand information: Figran. Public contact: support@figran.net. The worksheet can be used without buying or using Figran.