figran

A clock reading is not an elapsed-minute position

By Figran Team.

A clock label such as 10:02 names a position on a clock. It does not, by itself, say how many minutes have passed since a chosen starting observation. Treating clock digits as ordinary numbers can give a misleading gap when an hour changes.

This tool-independent worksheet gives seven questions and worked answers for reviewing a teaching time axis. The four readings below are invented. They are not observations from a scientific experiment, a classroom trial, a device test, or a customer project. No software, Figran account, or image generation is needed: a pencil and the two tables are enough.

1. Declare the toy source before drawing

For this activity only, A, B, C, and D are four ordered records from one imaginary clock on the same imaginary day. The clock advances normally between these readings. The source says when each record was logged; it says nothing about a process running, changing, or being observed continuously in the gaps.

Record Clock reading (HH:MM)
A 09:58
B 10:02
C 10:11
D 10:15

Keep the record letters. They connect the source table to the proposed plotted points. Do not replace the source labels with inferred process names such as started, completed, or recovered: none of those events was supplied.

A is the reference record for the proposed axis. The axis quantity will be minutes since A. Choosing A as a reference does not establish that anything began at A, or that there were no earlier records.

2. Convert the representation into the stated quantity

An hour contains 60 minutes. For these same-day readings, count the minutes represented by the hours and minutes before subtracting the reference reading.

09:58 represents 9 x 60 + 58 = 598 minutes from the imaginary day's beginning. The other readings represent 602, 611, and 615 minutes. Subtract 598 to obtain the proposed elapsed-minute positions: 0, 4, 13, and 17.

By contrast, removing the colons produces the ordinary numbers 958, 1002, 1011, and 1015. Subtracting those numbers gives gaps of 44, 9, and 4. These differences are not the minutes between the readings. The first gap crosses an hour boundary; the clock representation uses groups of 60 minutes, not groups of 100.

Do not silently fix this by making a visually convenient first gap. State the quantity, derive all positions from the same rule, and retain the original clock labels as source information.

3. Separate point positions from between-record intervals

The following table records two different quantities. One locates each record relative to A. The other describes the gap from the previous listed record.

Record Position: minutes since A Interval from previous listed record (minutes)
A 0 Not defined by this source
B 4 4
C 13 9
D 17 4

If drawing a linear axis for minutes since A, put the four marks at 0, 4, 13, and 17. The A-to-B and C-to-D gaps must be equal. The B-to-C gap must represent 9 minutes, not the same length as a 4-minute gap. A row of four equally spaced boxes would instead show record order; it would not preserve the supplied time intervals.

The zero beside A is an axis position relative to the chosen reference. It is not a supplied zero-length interval before A. Four ordered records define three gaps between adjacent listed records. A time-position plot and a plot of these three intervals therefore need different labels and different source-to-mark mappings.

4. Questions to complete before reading the answers

Q1. Write the minutes-since-A position for every record. Show how you handle the change from 09:58 to 10:02.

Q2. Which two adjacent-record intervals are equal? What distance check should a reviewer perform on a linear elapsed-minute axis?

Q3. A draft uses the numbers 958, 1002, 1011, and 1015 as its numeric positions and labels the axis minutes. Which gap is especially misleading, and what rule should replace that representation?

Q4. A proposed interval chart contains four bars labelled A, B, C, and D with heights 0, 4, 9, and 4. Which value was not supplied as an interval, and how could the chart be relabelled using only the defined intervals?

Q5. Does the source support this caption: The monitored system operated without interruption for 17 minutes? Write a caption that describes the proposed plot without inventing a system, its operation, or continuous monitoring.

Q6. Someone edits A's clock label to 10:00 but leaves the plotted positions at 0, 4, 13, and 17. Is this merely a layout change? If the source owner explicitly approves 10:00 as a replacement reading for A, derive the new positions.

Q7. A separate proposed record E has the clock label 00:03, but its day is unspecified. Can it be placed uniquely after D from that label alone? For this optional extension only, use imaginary days of exactly 1,440 minutes and compare two explicit assumptions: E on the original day, and E on the next day.

5. Worked answers

Q1. The positions are A = 0, B = 4, C = 13, and D = 17 minutes since A. For A to B, there are 2 minutes from 09:58 to 10:00 and 2 more to 10:02. The difference is 4 minutes. The same result follows from 602 - 598 = 4.

Q2. A to B and C to D are both 4 minutes. Their distances on the declared linear elapsed-minute axis should match. B to C is 9 minutes. A reviewer should compare the actual source-to-position differences, not judge equality from the clock labels' appearance.

Q3. The first numeric gap is 1002 - 958 = 44, although only 4 minutes separate the readings. Keep the original HH:MM strings as labels or source fields, and calculate positions in the declared elapsed-minute quantity. Do not use colon-free clock digits as minute positions.

Q4. The zero before A was not supplied as an interval. There is no previous listed record for A. If showing the three defined interval lengths, use A to B = 4, B to C = 9, and C to D = 4, with an axis labelled interval between adjacent listed records, in minutes. Do not convert an undefined interval into a measured zero.

Q5. No. The source identifies four invented logging times and does not name a monitored system or continuous observation. A bounded caption is: Four invented same-day clock readings, plotted as minutes since record A; adjacent listed intervals are 4, 9, and 4 minutes. This describes the supplied readings and their arithmetic without claiming what happened between them.

Q6. No. Changing a source clock label can change the derived quantity. With an explicitly approved replacement A = 10:00, the reference is 600 minutes from the imaginary day's beginning. The new positions are 0, 2, 11, and 15. Until that source change is approved, restore 09:58 or flag the inconsistency; do not quietly alter either the source or the geometry.

Q7. No unique placement is established. Under the same-day assumption, E represents 3 minutes from the day's beginning, so its position relative to A would be 3 - 598 = -595 minutes. Under the next-day assumption, it represents 1,440 + 3 = 1,443 minutes, so its position would be 845 minutes since A. These are two different assumed cases, not a reason to guess which day E belongs to. Obtain the missing day information or leave E unplaced. The original A-to-D source is unchanged by this optional extension.

6. A caption and handoff record

Use this proposed caption for the original four-record exercise: Four invented clock readings from the same imaginary day, shown on a linear axis in minutes since A. A, B, C, and D are at 0, 4, 13, and 17 minutes. The source records logging times only; the diagram makes no claim about activity in the intervening gaps.

For a review handoff, write down the source table, the same-day assumption, the reference record, the axis quantity and unit, the four derived positions, the three interval lengths, and the unresolved day for E if the extension is included. Keep a source correction distinct from a change in typography or spacing.

A partner can check whether these entries are present and whether the arithmetic matches the toy source. That is a suggested review activity, not a tested learning intervention, a real timestamp-processing procedure, or evidence that a tool guarantees correct figures.

7. Reuse and disclosure

Figran Team is affiliated with Figran, a commercial AI-assisted scientific illustration service. This original teaching text was drafted with AI assistance and its arithmetic checked against the explicitly invented readings. The worksheet reports no classroom trial, experimental findings, measured learning gains, or independent product evaluation. It can be used without purchasing or using Figran.

The original teaching text and invented exercise values are offered under CC BY 4.0. Attribute Figran Team, link this worksheet and the licence, and indicate changes. This permission does not cover Figran software, services, trademarks, logos, or third-party material.

Public resource contact: support@figran.net